<?xml version="1.0" encoding="UTF-8"?>

<record version="1" id="1572">
 <title>Electric Charge, Electric Potential, and Voltage</title>
 <name>ElectricChargeElectricPotentialAndVoltage</name>
 <created>2026-11-07 00:03:44</created>
 <modified>2026-11-07 00:03:44</modified>
 <type>Definition</type>
 <creator id="1" name="bloftin"/>
 <modifier id="1" name="bloftin"/>
 <comment>added computational resource</comment>
 <author id="1" name="bloftin"/>
 <classification>
	<category scheme="pacs" code="41.20.Cv"/>
	<category scheme="pacs" code="01.50.Pa"/>
	<category scheme="pacs" code="07.50.-e"/>
 </classification>
 <defines>
	<concept>electric charge</concept>
	<concept>elementary charge</concept>
	<concept>electric potential energy</concept>
	<concept>electric potential</concept>
	<concept>electric potential difference</concept>
	<concept>voltage</concept>
	<concept>reference potential</concept>
	<concept>equipotential</concept>
	<concept>terminal voltage</concept>
 </defines>
 <synonyms>
	<synonym concept="Electric Charge, Electric Potential, and Voltage" alias="E01"/>
 </synonyms>
 <related>
	<object name="ElectricCharge"/>
 </related>
 <keywords>
	<term>electric charge</term>
	<term>elementary charge</term>
	<term>electric potential</term>
	<term>voltage</term>
	<term>potential energy</term>
	<term>electric field</term>
	<term>electrostatic work</term>
	<term>battery</term>
	<term>voltmeter</term>
	<term>reference potential</term>
	<term>electronvolt</term>
	<term>home electrical laboratory</term>
 </keywords>
 <preamble>% this is the default PhysicsLibrary preamble.  as your knowledge
% of TeX increases, you will probably want to edit this, but
% it should be fine as is for beginners.

% almost certainly you want these
\usepackage{amssymb}
\usepackage{amsmath}
\usepackage{amsfonts}

% used for TeXing text within eps files
%\usepackage{psfrag}
% need this for including graphics (\includegraphics).
% If you use \includegraphics{figure} with no file extension, PhysicsLibrary
% will prefer figure.png before falling back to figure.eps.
\usepackage{graphicx}
\DeclareGraphicsExtensions{.png,.jpg,.jpeg,.pdf,.eps}
% for neatly defining theorems and propositions
%\usepackage{amsthm}
% making logically defined graphics
%\usepackage{xypic}

% there are many more packages, add them here as you need them

% define commands here</preamble>
 <content>\section*{E01: Electric Charge, Electric Potential, and Voltage}

\emph{Foundations of Electricity and Electrical Measurement, mini-lecture 1.}

A voltmeter has two leads. It compares two points and displays a number in
volts. To understand that simple measurement, we need three distinct ideas:
\emph{electric charge}, \emph{electric potential energy}, and \emph{electric
potential}. The distinction is important because the voltage between two
points is not the same as the energy possessed by one particular charge.

The central relationship is
\begin{equation}
\boxed{\Delta U=q\,\Delta V},
\end{equation}
where $\Delta U$ is the change of electrostatic potential energy of a test
charge $q$ moved between two points, and $\Delta V$ is the potential
difference between those points. This relationship applies to a fixed test
charge in a prescribed electrostatic field.

\subsection*{Learning objectives}

After this lecture, the reader should be able to:
\begin{enumerate}
\item distinguish positive and negative charge and convert coulombs into
numbers of elementary charges;
\item explain why electric potential energy depends on the chosen charge,
while electric potential describes the electric environment;
\item calculate changes in energy from voltage, including the sign;
\item derive the potential difference from the electric work integral;
\item predict the direction of electric-field force on positive and negative
charges;
\item explain why a voltmeter has two leads and why a voltage requires a
reference point;
\item interpret battery terminal voltage and separate it from an ideal source
model.
\end{enumerate}

\section{Electric charge}

Electric charge is a property of matter that determines its electric
interactions. There are two signs, positive and negative. Protons carry
positive elementary charge, electrons carry negative elementary charge, and
neutrons are electrically neutral.

The elementary charge is defined exactly in the SI system as
\begin{equation}
 e=1.602\,176\,634\times10^{-19}\ \mathrm C.
\end{equation}
An electron has charge $-e$ and a proton has charge $+e$.

For a macroscopic object whose net charge is due to an imbalance of elementary
charges, we may write
\begin{equation}
\boxed{q=ne},
\end{equation}
where $n$ is an integer that may be positive or negative. This form describes
the net charge of ordinary objects made from charged particles. The coulomb,
written $\mathrm C$, is the SI unit of charge.

An object with charge $-3e$ has three more electrons than needed for an
electrically neutral object of the same composition. A positive charge need
not mean that protons moved: a solid can become positively charged by losing
electrons.

\subsection*{Charge conservation}

Electric charge is conserved. In a closed system the algebraic total charge
cannot change merely because charge moves from one object to another.
Rubbing, contact, and electrostatic induction redistribute charge; they do
not create net charge. E02 will connect this principle to the current at a
circuit junction.

\subsection*{How charge interacts}

For two stationary point charges separated by distance $r$ in vacuum,
Coulomb's law gives the force magnitude
\begin{equation}
 |\mathbf F|=\frac{1}{4\pi\varepsilon_0}\frac{|q_1q_2|}{r^2}.
\end{equation}
Like charges repel and opposite charges attract. This force can do work when
charges move. The work provides the connection to electric potential energy.

\section{From mechanical work to electric potential energy}

Recall the mechanical definition of work:
\begin{equation}
 W=\int_A^B \mathbf F\cdot d\mathbf r.
\end{equation}
For an electrostatic field, the electric force is conservative. We can
therefore define an electric potential energy $U$ such that
\begin{equation}
\boxed{\Delta U=U_B-U_A=-W_{\rm electric,A\to B}}.
\end{equation}
This is the same sign convention used with gravitational potential energy:
if a conservative force does positive work on a particle, its associated
potential energy decreases.

The magnitude and sign of the energy change depend on which charge is moved.
For example, a charge twice as large experiences twice the force at the same
point in a prescribed field and therefore has twice the change in potential
energy between two fixed locations.

\begin{center}
\begin{minipage}{0.98\textwidth}
\centering
\includegraphics[width=0.88\textwidth,keepaspectratio]{E01_fig01_potential_energy_and_charge.png}

{\small Figure 1. For the same electrostatic potential difference, the energy change depends on the sign and magnitude of the test charge.}
\end{minipage}
\end{center}

\section{Electric potential: energy per unit charge}

To describe the electric environment independently of the charge we use to
probe it, we define an \emph{electric potential difference} by
\begin{equation}
\boxed{V_B-V_A=\frac{U_B-U_A}{q}}.
\end{equation}
The ratio is independent of the small test charge $q$, provided that the
test charge does not appreciably disturb the charges creating the field.

The electric potential $V$ at a point is potential energy per unit charge,
relative to a chosen reference:
\begin{equation}
 V=\frac{U}{q}
\end{equation}
when the same zero of potential energy is used consistently. More generally,
it is the potential \emph{difference} that is directly meaningful:
\begin{equation}
\boxed{\Delta U=q\,(V_B-V_A)}.
\end{equation}

The SI unit follows immediately:
\begin{equation}
\boxed{1\ \mathrm V=1\ \mathrm{J/C}}.
\end{equation}
A potential difference of one volt means a change in electrostatic potential
energy of one joule per coulomb of charge moved between the two locations.
It does \emph{not} mean that every particle acquires one joule of energy.

\subsection*{The sign matters}

Suppose $V_B-V_A=+5\ \mathrm V$. Moving a positive
$+2\ \mu\mathrm C$ test charge from $A$ to $B$ changes its potential energy by
\begin{align}
 \Delta U&amp;=q\Delta V,\\
 &amp;=\bigl(2\times10^{-6}\ \mathrm C\bigr)(5\ \mathrm{J/C}),\\
 &amp;=+1.0\times10^{-5}\ \mathrm J.
\end{align}
The energy has increased by $10\ \mu\mathrm J$. For a negative
$-2\ \mu\mathrm C$ charge taking the same path in the same fixed field,
\begin{equation}
 \Delta U=-10\ \mu\mathrm J.
\end{equation}
The potential difference has not changed. The sign of the moving charge
changes the sign of its energy change.

\section{Electric fields and voltage}

An electric field is defined through the force on a small positive test
charge:
\begin{equation}
\boxed{\mathbf E=\frac{\mathbf F}{q}}.
\end{equation}
For a stationary test charge in an electrostatic field,
\begin{equation}
 dW_{\rm electric}=q\mathbf E\cdot d\mathbf r.
\end{equation}
Combining this with $dU=-dW_{\rm electric}$ and $dU=q\,dV$ yields
\begin{equation}
 q\,dV=-q\mathbf E\cdot d\mathbf r.
\end{equation}
Cancel the nonzero test charge:
\begin{equation}
 dV=-\mathbf E\cdot d\mathbf r.
\end{equation}
After integration,
\begin{equation}
\boxed{V_B-V_A=-\int_A^B\mathbf E\cdot d\mathbf r}.
\end{equation}
This is the fundamental connection between an \emph{electrostatic} field
and a voltage difference.

Along a displacement parallel to the electric field, potential decreases.
A positive test charge accelerates in the field direction if no other forces
oppose it. A negative test charge feels a force opposite the field and may
move toward higher potential while its potential energy decreases.

\subsection*{Uniform-field example: parallel plates}

Consider two large, oppositely charged parallel plates separated by $d$.
Far from their edges, the field can be treated approximately as uniform:
\begin{equation}
\mathbf E=E\,\hat{\mathbf x}.
\end{equation}
If $A$ is on the left and $B$ on the right, with separation $d$ in the
field direction, then
\begin{equation}
\boxed{V_B-V_A=-Ed}.
\end{equation}

\begin{center}
\begin{minipage}{0.98\textwidth}
\centering
\includegraphics[width=0.91\textwidth,keepaspectratio]{E01_fig02_parallel_plates_voltage.png}

{\small Figure 2. Between idealized parallel plates, the electric field points from the positive plate to the negative plate, while the electric potential decreases in that direction. The uniform-field approximation is best away from plate edges.}
\end{minipage}
\end{center}

As an example, for $E=200\ \mathrm{V/m}$ and $d=0.050\ \mathrm m$,
\begin{equation}
 V_B-V_A=-(200)(0.050)=-10\ \mathrm V.
\end{equation}
A positive $2\ \mathrm{nC}$ charge moving from $A$ to $B$ changes its
potential energy by
\begin{align}
 \Delta U&amp;=q\Delta V,\\
 &amp;=(2\times10^{-9})(-10)\ \mathrm J,\\
 &amp;=-2.0\times10^{-8}\ \mathrm J.
\end{align}
The field does $+20\ \mathrm{nJ}$ of work on the charge.

\subsection*{Scope of the electrostatic formula}

The line integral above is path independent when the electric field is
electrostatic. In more general situations, changing magnetic flux can
produce electric fields for which the integral around a closed path is not
zero. A single-valued scalar potential alone then does not describe the
entire electric field. We will revisit that distinction in the induction
and electromagnetic-wave laboratories.

\section{Potential near a point charge}

Outside a stationary point charge $Q$ in vacuum, Coulomb's law gives the
radial electric field
\begin{equation}
 \mathbf E(r)=\frac{1}{4\pi\varepsilon_0}\frac{Q}{r^2}
 \hat{\mathbf r}.
\end{equation}
Choose $V(\infty)=0$. From the potential integral,
\begin{align}
 V(r)-V(\infty)
 &amp;=-\int_{\infty}^{r}\frac{1}{4\pi\varepsilon_0}
 \frac{Q}{s^2}\,ds,\\
 &amp;=\frac{1}{4\pi\varepsilon_0}\frac{Q}{r}.
\end{align}
Thus
\begin{equation}
\boxed{V(r)=\frac{1}{4\pi\varepsilon_0}\frac{Q}{r}}.
\end{equation}

\begin{center}
\begin{minipage}{0.98\textwidth}
\centering
\includegraphics[width=0.84\textwidth,keepaspectratio]{E01_fig04_point_charge_potential.png}

{\small Figure 3. Electric potential versus distance from a positive point charge when the potential is defined to be zero at infinity. The magnitude decreases with distance.}
\end{minipage}
\end{center}

This is a simple example where the absolute numerical value of $V$ becomes
meaningful only after we state a chosen reference. For an extended circuit
with a selected reference node, we usually set that node to $0\ \mathrm V$
instead of using infinity.

\section{Voltage means a difference between two points}

The expression \emph{voltage at point A} is shorthand. A voltage must be
relative to another point or reference. Define
\begin{equation}
\boxed{V_{AB}=V_A-V_B}.
\end{equation}
A voltmeter with its red lead connected to $A$ and its black lead connected
to $B$ ideally displays $V_{AB}$.

\begin{center}
\begin{minipage}{0.98\textwidth}
\centering
\includegraphics[width=0.86\textwidth,keepaspectratio]{E01_fig03_voltmeter_two_points.png}

{\small Figure 4. A voltmeter reports the electric potential of its red probe relative to its black probe. Reversing the leads reverses the displayed sign.}
\end{minipage}
\end{center}

Suppose $V_A=+4.0\ \mathrm V$ and $V_B=+1.5\ \mathrm V$ relative to a
chosen reference. Then
\begin{equation}
 V_{AB}=4.0-1.5=+2.5\ \mathrm V.
\end{equation}
Swapping the voltmeter leads produces
\begin{equation}
 V_{BA}=-2.5\ \mathrm V.
\end{equation}
The circuit has not changed; only the order of the comparison changed.

\subsection*{Reference potential and circuit ground}

We may add the same constant $C$ to all potentials without changing any
potential difference:
\begin{equation}
 (V_A+C)-(V_B+C)=V_A-V_B.
\end{equation}
That freedom is why one node is often designated \emph{ground} or
$0\ \mathrm V$ in a circuit diagram.

\begin{center}
\begin{minipage}{0.98\textwidth}
\centering
\includegraphics[width=0.82\textwidth,keepaspectratio]{E01_fig05_reference_shift.png}

{\small Figure 5. Adding the same constant to every node potential changes the numerical labels but leaves all measured voltage differences unchanged.}
\end{minipage}
\end{center}

A reference node is not automatically a physical connection to Earth.
Protective Earth, chassis ground, and signal reference are different concepts,
even though some instruments connect them internally. The practical wiring
and safety implications are covered in E05, E13, and EDL01.

\section{Batteries and terminal voltage}

A battery uses chemical processes to separate charge and maintain a
potential difference between its terminals. The source provides energy per
unit charge to charges moving through it via nonelectrostatic forces. This
energy per unit charge is the battery's \emph{electromotive force}, often
represented by $\mathcal E$ and measured in volts. Despite its name,
electromotive force is not a mechanical force measured in newtons.

For a simple battery model with internal resistance $r$, delivering a
positive current $I$ to an external load,
\begin{equation}
\boxed{V_{\rm terminal}=\mathcal E-Ir}.
\end{equation}
When $I\approx 0$ and the battery is approximately at equilibrium, the
terminal voltage is often close to $\mathcal E$. Under load, the terminal
voltage can be smaller. Real batteries may have more complicated behavior,
but the simple model is useful for our first measurements.

An ideal voltage source maintains its specified terminal voltage regardless
of current. A real battery and a real function generator are not perfect
ideal sources. E08 develops their circuit models.

\subsection*{What the voltmeter measures}

A digital multimeter set to DC voltage mode estimates the potential
difference between its input terminals. It is normally connected
\emph{in parallel} with the two points being compared. A practical voltmeter
has finite input resistance, so it draws a small current and can alter the
potential difference it is trying to measure. E09 and E10 quantify that
measurement loading effect.

\section{The electronvolt: a unit of energy}

A particle with charge magnitude $e$ that undergoes a potential difference
of magnitude $1\ \mathrm V$ has an energy change of magnitude
\begin{equation}
 e(1\ \mathrm V)=1.602\,176\,634\times10^{-19}\ \mathrm J.
\end{equation}
We define the \emph{electronvolt}:
\begin{equation}
\boxed{1\ \mathrm{eV}=1.602\,176\,634\times10^{-19}\ \mathrm J}.
\end{equation}
An electronvolt is a unit of \emph{energy}, not a unit of voltage. It is
especially useful when the energies of individual electrons or ions are
much smaller than a joule.

If an electron moves from $A$ to $B$ and $V_B-V_A=+3\ \mathrm V$,
\begin{equation}
 \Delta U=(-e)(+3\ \mathrm V)=-3\ \mathrm{eV}.
\end{equation}
If its potential energy decrease becomes kinetic energy without losses, its
kinetic energy increases by $3\ \mathrm{eV}$.

\section{A simple EDL01 measurement}

Use a battery-operated digital multimeter and a small, low-voltage battery.
Never use the current input for this voltage measurement.

\begin{enumerate}
\item Set the multimeter to DC voltage mode. Place the black lead in
\texttt{COM} and the red lead in the marked voltage input.
\item Touch the red probe to the positive battery terminal and the black
probe to the negative terminal. Record the reading and its polarity.
\item Reverse the leads without changing the battery. Record the reading.
\item Connect two cells in series using an appropriate holder. Predict the
voltage across both cells from the individual terminal voltages, then
measure it.
\item Choose a reference terminal as $0\ \mathrm V$ and label the
potentials at the other terminals. Check differences by direct measurement.
\end{enumerate}

\textbf{Safety.} Use only low-voltage, current-limited or small dry-cell
sources. Do not short a battery, connect a multimeter's current input across
a source, or connect a grounded oscilloscope lead without checking its ground
connections. Avoid mains wiring and energized power equipment in this
introductory laboratory.

\section{Worked example: energy and polarity}

A charge of $q=-4.0\ \mu\mathrm C$ moves from point $A$ to $B$, where
\begin{equation}
 V_A=+2.0\ \mathrm V,
 \qquad V_B=-1.0\ \mathrm V.
\end{equation}
Find the change in the charge's electrostatic potential energy and the
work done by the electric force.

\textbf{Step 1: Determine the potential difference.}
\begin{equation}
 \Delta V=V_B-V_A=-1.0-2.0=-3.0\ \mathrm V.
\end{equation}
\textbf{Step 2: Apply the energy relation.}
\begin{align}
 \Delta U
 &amp;=q\Delta V,\\
 &amp;=(-4.0\times10^{-6})(-3.0)\ \mathrm J,\\
 &amp;=+12\ \mu\mathrm J.
\end{align}
\textbf{Step 3: Relate work to potential energy.}
\begin{equation}
 W_{\rm electric}=-\Delta U=-12\ \mu\mathrm J.
\end{equation}
The field does negative work along the stated displacement and the negative
charge gains electrostatic potential energy. No statement about the charge's
actual speed follows without additional information about other forces and
its initial motion.

\section{Common misconceptions}

\begin{itemize}
\item \textbf{Voltage is not charge.} Charge is measured in coulombs; voltage
is energy per unit charge in joules per coulomb.
\item \textbf{Voltage is not energy.} A $10\ \mathrm V$ difference changes
the energy of a $1\ \mathrm C$ charge by $10\ \mathrm J$, but changes the
energy of a $2\ \mathrm C$ charge by $20\ \mathrm J$.
\item \textbf{Higher potential does not always mean higher potential
energy.} For a negative test charge, increasing potential lowers its
potential energy.
\item \textbf{Zero volts does not mean zero electric field.} A point or
node may be labeled $0\ \mathrm V$ while experiencing a nonzero field.
\item \textbf{Ground is not necessarily Earth.} Many isolated battery
circuits use an arbitrary local voltage reference.
\item \textbf{A voltmeter is not an ideal observer.} Its finite input
resistance can load the circuit and change the displayed voltage.
\item \textbf{EMF is not a force.} It represents the work supplied per unit
charge by an energy source in the relevant source model.
\end{itemize}

\section{Concept checks}

\begin{enumerate}
\item If the red and black probes of an ideal voltmeter are reversed, what
happens to the displayed reading?
\item Two different charges move between the same points in the same
unperturbed electrostatic field. Which quantity is the same for both:
$\Delta V$ or $\Delta U$?
\item Can an electron lose potential energy while moving toward a point of
higher electric potential?
\item Is a circuit node labeled $0\ \mathrm V$ necessarily connected to
physical Earth?
\item In what direction does the electrostatic potential change when moving
along an electric field line?
\end{enumerate}

\subsection*{Answers}

\begin{enumerate}
\item The ideal reading changes sign but not magnitude.
\item The potential difference is the same; the energy change scales with
charge and its sign.
\item Yes. Since $q=-e$, $\Delta U=q\Delta V$ is negative when
$\Delta V&gt;0$.
\item No. It may simply be the chosen local reference.
\item It decreases, since $dV=-\mathbf E\cdot d\mathbf r$.
\end{enumerate}

For more numerical practice, see E01E1, \emph{Worked Problems in Charge,
Potential, and Voltage}.

\section{Summary and next step}

Electric charge determines how matter responds to an electric field.
Electrostatic potential energy describes the energy of a particular charge
in a prescribed field. Electric potential describes the field's energy
landscape per unit charge.

The defining equations are
\begin{equation}
\boxed{\Delta U=q\,(V_B-V_A)}
\end{equation}
and
\begin{equation}
\boxed{V_B-V_A=-\int_A^B\mathbf E\cdot d\mathbf r}.
\end{equation}
A voltmeter compares two points, so choosing a reference and reading the
polarity correctly are central measurement skills. In E02 we introduce
\emph{electric current} and show how conservation of charge constrains
current flow through a circuit.

\section*{References and learning connections}

\begin{thebibliography}{9}
\bibitem{openstax}
OpenStax, \emph{University Physics, Volume 2}, chapters on electric charge,
electric fields, and electric potential.
\bibitem{griffiths}
D. J. Griffiths, \emph{Introduction to Electrodynamics}, sections on
electrostatics, potential, and work.
\bibitem{e00}
PhysicsLibrary, E00, \emph{Foundations of Electricity and Electrical
Measurement: A Mini-Lecture Roadmap}.
\bibitem{edl01}
PhysicsLibrary, EDL01, \emph{Practical Electricity and Measurement for
Electrodynamics}.
\end{thebibliography}</content>
</record>
