<?xml version="1.0" encoding="UTF-8"?>

<record version="1" id="1371">
 <title>Kinetic Energy and the Work-Energy Theorem</title>
 <name>KineticEnergyAndTheWorkEnergyTheorem</name>
 <created>2026-10-03 14:56:45</created>
 <modified>2026-10-03 14:56:45</modified>
 <type>Topic</type>
 <creator id="1" name="bloftin"/>
 <modifier id="1" name="bloftin"/>
 <comment>fixed pacs</comment>
 <author id="1" name="bloftin"/>
 <classification>
	<category scheme="pacs" code="45.50.-j"/>
	<category scheme="pacs" code="45.05.+x"/>
 </classification>
 <defines>
	<concept>kinetic energy</concept>
	<concept>work-energy theorem</concept>
	<concept>net work</concept>
 </defines>
 <synonyms>
	<synonym concept="Kinetic Energy and the Work-Energy Theorem" alias="M03-02"/>
 </synonyms>
 <keywords>
	<term>kinetic energy</term>
	<term>work-energy theorem</term>
	<term>net work</term>
	<term>translational kinetic energy</term>
	<term>work</term>
	<term>speed</term>
	<term>Newton's second law</term>
	<term>energy method</term>
 </keywords>
 <preamble>% this is the default PhysicsLibrary preamble.  as your knowledge
% of TeX increases, you will probably want to edit this, but
% it should be fine as is for beginners.

% almost certainly you want these
\usepackage{amssymb}
\usepackage{amsmath}
\usepackage{amsfonts}

% used for TeXing text within eps files
%\usepackage{psfrag}
% need this for including graphics (\includegraphics).
% If you use \includegraphics{figure} with no file extension, PhysicsLibrary
% will prefer figure.png before falling back to figure.eps.
\usepackage{graphicx}
\DeclareGraphicsExtensions{.png,.jpg,.jpeg,.pdf,.eps}
% for neatly defining theorems and propositions
%\usepackage{amsthm}
% making logically defined graphics
%\usepackage{xypic}

% there are many more packages, add them here as you need them

% define commands here</preamble>
 <content>\section*{Kinetic Energy and the Work-Energy Theorem}

M03-01 introduced work as the scalar line integral
\begin{equation}
W=\int \mathbf F\cdot d\mathbf r.
\end{equation}
The present article develops the dynamical meaning of that integral.

For a particle of constant mass $m$, the scalar quantity
\begin{equation}
\boxed{
K=\frac12 mv^2
}
\end{equation}
is called its \emph{kinetic energy}.  The work-energy theorem states that the net work done on the particle equals the change in kinetic energy:
\begin{equation}
\boxed{
W_{\rm net}=K_f-K_i=\Delta K.
}
\end{equation}

This relation is not an independent law added to Newtonian mechanics.  It follows directly from Newton's second law.  Its practical value is that it replaces a vector equation involving acceleration with a scalar relation between work and speed.  In many problems, that removes the need to solve explicitly for time.

\begin{center}
\includegraphics[width=0.88\textwidth,keepaspectratio]{M03_02_fig01_work_energy_chain.png}

{\small Figure 1. Newton's second law can be projected along the instantaneous displacement.  The resulting scalar relation connects net work directly to the change in kinetic energy.}
\end{center}

\section{Kinetic energy}

For a particle of mass $m$ moving with velocity $\mathbf v$,
\begin{equation}
v^2=\mathbf v\cdot\mathbf v.
\end{equation}
The translational kinetic energy is
\begin{equation}
\boxed{
K=\frac12 m\,\mathbf v\cdot\mathbf v
=\frac12 mv^2.
}
\end{equation}

Several properties follow immediately.

\begin{itemize}
\item Kinetic energy is a scalar.
\item For positive mass, $K\ge 0$.
\item Kinetic energy depends on speed, not on the direction of velocity.
\item Reversing the velocity leaves the kinetic energy unchanged.
\item Doubling the speed multiplies the kinetic energy by four.
\item Kinetic energy depends on the reference frame because the measured velocity depends on the reference frame.
\end{itemize}

The SI unit is the joule:
\begin{equation}
1\,{\rm J}
=
1\,{\rm N\,m}
=
1\,{\rm kg\,m^2/s^2}.
\end{equation}

The dimensions are therefore
\begin{equation}
[K]=ML^2T^{-2}.
\end{equation}

\begin{center}
\includegraphics[width=0.78\textwidth,keepaspectratio]{M03_02_fig02_kinetic_energy_vs_velocity.png}

{\small Figure 2. For fixed mass, $K=\frac12mv^2$ is a parabola when plotted against signed velocity.  Opposite velocities with equal magnitude have equal kinetic energy.}
\end{center}

\section{Derivation from Newton's second law}

For a particle of constant mass,
\begin{equation}
\mathbf F_{\rm net}
=
m\frac{d\mathbf v}{dt}.
\end{equation}

Take the scalar product with the velocity:
\begin{equation}
\mathbf F_{\rm net}\cdot\mathbf v
=
m\frac{d\mathbf v}{dt}\cdot\mathbf v.
\end{equation}

The derivative of $v^2=\mathbf v\cdot\mathbf v$ is
\begin{align}
\frac{d}{dt}\left(v^2\right)
&amp;=
\frac{d}{dt}\left(\mathbf v\cdot\mathbf v\right)\\
&amp;=
2\mathbf v\cdot\frac{d\mathbf v}{dt}.
\end{align}

Hence
\begin{equation}
\mathbf v\cdot\frac{d\mathbf v}{dt}
=
\frac12\frac{d}{dt}\left(v^2\right).
\end{equation}

Substitution gives
\begin{equation}
\mathbf F_{\rm net}\cdot\mathbf v
=
\frac{d}{dt}\left(\frac12mv^2\right).
\end{equation}

Therefore
\begin{equation}
\boxed{
\mathbf F_{\rm net}\cdot\mathbf v
=
\frac{dK}{dt}.
}
\end{equation}

This is the differential form of the work-energy theorem.  Since
\begin{equation}
\mathbf v=\frac{d\mathbf r}{dt},
\end{equation}
we have
\begin{equation}
\mathbf F_{\rm net}\cdot\mathbf v\,dt
=
\mathbf F_{\rm net}\cdot d\mathbf r.
\end{equation}

Integrating from an initial state $i$ to a final state $f$,
\begin{equation}
\int_i^f
\mathbf F_{\rm net}\cdot d\mathbf r
=
\int_{t_i}^{t_f}\frac{dK}{dt}\,dt.
\end{equation}

The right side is
\begin{equation}
K_f-K_i.
\end{equation}

Thus
\begin{equation}
\boxed{
\int_i^f
\mathbf F_{\rm net}\cdot d\mathbf r
=
K_f-K_i.
}
\end{equation}

By definition, the integral on the left is the net work:
\begin{equation}
\boxed{
W_{\rm net}=\Delta K.
}
\end{equation}

\section{One-dimensional derivation}

For one-dimensional motion along $x$,
\begin{equation}
F_{\rm net}=ma.
\end{equation}

Using the chain rule,
\begin{equation}
a=\frac{dv}{dt}
=
\frac{dv}{dx}\frac{dx}{dt}
=
v\frac{dv}{dx}.
\end{equation}

Therefore
\begin{equation}
F_{\rm net}
=
mv\frac{dv}{dx}.
\end{equation}

Multiply by $dx$:
\begin{equation}
F_{\rm net}\,dx
=
mv\,dv.
\end{equation}

Integrating,
\begin{align}
\int_{x_i}^{x_f}F_{\rm net}\,dx
&amp;=
m\int_{v_i}^{v_f}v\,dv\\
&amp;=
\frac12m\left(v_f^2-v_i^2\right).
\end{align}

Thus
\begin{equation}
\boxed{
W_{\rm net}
=
\frac12mv_f^2-\frac12mv_i^2.
}
\end{equation}

This form is especially useful when the force is known as a function of position.

\section{Why the theorem uses net work}

Suppose several forces act on the particle:
\begin{equation}
\mathbf F_{\rm net}
=
\sum_j\mathbf F_j.
\end{equation}

Then
\begin{align}
W_{\rm net}
&amp;=
\int_i^f
\left(\sum_j\mathbf F_j\right)\cdot d\mathbf r\\
&amp;=
\sum_j
\int_i^f
\mathbf F_j\cdot d\mathbf r.
\end{align}

Therefore
\begin{equation}
\boxed{
W_{\rm net}=\sum_j W_j.
}
\end{equation}

The work-energy theorem concerns the sum of the work done by all forces:
\begin{equation}
\boxed{
\sum_j W_j
=
\Delta K.
}
\end{equation}

An individual force may do positive work while another does negative work.  The change in kinetic energy is controlled by their total.

\section{The sign of net work}

Because
\begin{equation}
W_{\rm net}=K_f-K_i,
\end{equation}
the sign of net work has an immediate interpretation.

\begin{align}
W_{\rm net}&gt;0
&amp;\quad\Longrightarrow\quad
K_f&gt;K_i,\\
W_{\rm net}=0
&amp;\quad\Longrightarrow\quad
K_f=K_i,\\
W_{\rm net}&lt;0
&amp;\quad\Longrightarrow\quad
K_f&lt;K_i.
\end{align}

For constant mass this becomes
\begin{align}
W_{\rm net}&gt;0
&amp;\quad\Longrightarrow\quad
v_f&gt;v_i,\\
W_{\rm net}=0
&amp;\quad\Longrightarrow\quad
v_f=v_i,\\
W_{\rm net}&lt;0
&amp;\quad\Longrightarrow\quad
v_f&lt;v_i,
\end{align}
where $v_i$ and $v_f$ denote speeds.

\begin{center}
\includegraphics[width=0.88\textwidth,keepaspectratio]{M03_02_fig03_net_work_signs.png}

{\small Figure 3. Positive net work increases kinetic energy, zero net work leaves kinetic energy unchanged, and negative net work decreases kinetic energy.}
\end{center}

A crucial point is that zero net work does \emph{not} imply zero net force.

\section{Zero net work does not imply zero acceleration}

Uniform circular motion provides the standard example.  The net radial force is perpendicular to the instantaneous displacement:
\begin{equation}
\mathbf F_{\rm net}\cdot d\mathbf r=0.
\end{equation}

Therefore
\begin{equation}
W_{\rm net}=0.
\end{equation}

The kinetic energy and speed remain constant:
\begin{equation}
\Delta K=0.
\end{equation}

Nevertheless, the velocity vector continually changes direction, so the acceleration is not zero:
\begin{equation}
a=\frac{v^2}{R}.
\end{equation}

The work-energy theorem tracks changes in speed through kinetic energy.  It does not by itself describe changes in the direction of velocity.

\section{Solving directly for final speed}

From
\begin{equation}
W_{\rm net}
=
\frac12m\left(v_f^2-v_i^2\right),
\end{equation}
solve for $v_f^2$:
\begin{equation}
v_f^2
=
v_i^2+\frac{2W_{\rm net}}{m}.
\end{equation}

Thus
\begin{equation}
\boxed{
v_f
=
\sqrt{
v_i^2+\frac{2W_{\rm net}}{m}
}
}
\end{equation}
when only the final speed is required.

The square root emphasizes that kinetic energy gives speed, not the sign of a one-dimensional velocity component.  Direction must be obtained from the geometry and dynamics of the problem.

\section{Worked example 1: horizontal pull with friction}

A $5.0\,{\rm kg}$ block moves $4.0\,{\rm m}$ along a horizontal floor.  A constant horizontal pull of $20\,{\rm N}$ acts in the direction of motion while kinetic friction of magnitude $8.0\,{\rm N}$ acts opposite the motion.  The block initially moves at $2.0\,{\rm m/s}$.

The work done by the pull is
\begin{equation}
W_{\rm pull}
=
(20)(4.0)
=
80\,{\rm J}.
\end{equation}

The work done by friction is
\begin{equation}
W_f
=
-(8.0)(4.0)
=
-32\,{\rm J}.
\end{equation}

The normal force and weight are perpendicular to the horizontal displacement, so each does zero work.

Hence
\begin{equation}
W_{\rm net}
=
80-32
=
48\,{\rm J}.
\end{equation}

The initial kinetic energy is
\begin{equation}
K_i
=
\frac12(5.0)(2.0)^2
=
10\,{\rm J}.
\end{equation}

Therefore
\begin{equation}
K_f
=
K_i+W_{\rm net}
=
58\,{\rm J}.
\end{equation}

The final speed is
\begin{align}
v_f
&amp;=
\sqrt{\frac{2K_f}{m}}\\
&amp;=
\sqrt{\frac{2(58)}{5.0}}\\
&amp;=
4.82\,{\rm m/s}.
\end{align}

\section{Worked example 2: upward motion under gravity}

A $0.50\,{\rm kg}$ ball moves upward from one point to another point $3.0\,{\rm m}$ higher.  Its initial speed is $10.0\,{\rm m/s}$.  Neglect air resistance.

Gravity is the only force that does work.  Its work is
\begin{equation}
W_g
=
-mg\Delta y.
\end{equation}

Thus
\begin{align}
W_{\rm net}
&amp;=
-(0.50)(9.81)(3.0)\\
&amp;=
-14.7\,{\rm J}.
\end{align}

The initial kinetic energy is
\begin{equation}
K_i
=
\frac12(0.50)(10.0)^2
=
25.0\,{\rm J}.
\end{equation}

Hence
\begin{equation}
K_f
=
25.0-14.7
=
10.3\,{\rm J}.
\end{equation}

The final speed is
\begin{align}
v_f
&amp;=
\sqrt{\frac{2K_f}{m}}\\
&amp;=
\sqrt{\frac{2(10.3)}{0.50}}\\
&amp;=
6.42\,{\rm m/s}.
\end{align}

No time of flight was required.

\section{Worked example 3: constant-speed circular motion}

A $2.0\,{\rm kg}$ mass moves at constant speed $5.0\,{\rm m/s}$ in a horizontal circle of radius $3.0\,{\rm m}$.

Its kinetic energy is
\begin{equation}
K
=
\frac12(2.0)(5.0)^2
=
25\,{\rm J}.
\end{equation}

The inward net force has magnitude
\begin{equation}
F_{\rm net}
=
\frac{mv^2}{R}
=
\frac{(2.0)(5.0)^2}{3.0}
=
16.7\,{\rm N}.
\end{equation}

This force is always perpendicular to the instantaneous displacement, so
\begin{equation}
W_{\rm net}=0.
\end{equation}

Thus
\begin{equation}
\Delta K=0,
\end{equation}
even though the net force and acceleration are nonzero.

\section{Reference-frame dependence}

Kinetic energy is not invariant under a change of inertial reference frame.

Suppose frame $S'$ moves with constant velocity $\mathbf U$ relative to frame $S$.  The particle velocities are related by the Galilean transformation
\begin{equation}
\mathbf v'
=
\mathbf v-\mathbf U.
\end{equation}

Then
\begin{equation}
K'
=
\frac12m|\mathbf v-\mathbf U|^2.
\end{equation}

In general,
\begin{equation}
K'\ne K.
\end{equation}

Work can also have different numerical values in different inertial frames because the displacement during a force interaction can differ between frames.  The important point is consistency: when force, displacement, and kinetic energy are evaluated in the same inertial frame, the work-energy theorem remains valid.

\section{Work-energy theorem and Newton's second law}

The work-energy theorem is derived from Newton's second law, so the two methods contain the same Newtonian dynamics.  They organize the calculation differently.

Newton's second law is often preferred when the goal is acceleration, force, trajectory as a function of time, or the direction of motion.

The work-energy theorem is often preferred when the goal is speed after a known displacement and the work of the forces can be found directly.

Because kinetic energy is a scalar, the energy method can be much shorter than solving component equations.

\section{Common mistakes}

\begin{enumerate}
\item Using the work of one force instead of the net work.
\item Forgetting that kinetic energy depends on speed squared.
\item Assuming that zero net work means zero net force.
\item Assuming that zero net work means the particle is at rest.
\item Treating kinetic energy as a vector.
\item Using velocity rather than speed in $K=\frac12mv^2$ without recognizing that $v^2$ means the squared magnitude.
\item Forgetting that a force perpendicular to the displacement does zero instantaneous work.
\item Assuming that the work-energy theorem determines the direction of the final velocity.
\item Mixing quantities measured in different reference frames.
\end{enumerate}

\section{Practice exercises}

\begin{enumerate}
\item A $3.0\,{\rm kg}$ particle speeds up from $2.0\,{\rm m/s}$ to $6.0\,{\rm m/s}$.  Find the net work done on it.

\item A $4.0\,{\rm kg}$ object has $K=72\,{\rm J}$.  Find its speed.

\item A $2.0\,{\rm kg}$ block initially moves at $5.0\,{\rm m/s}$.  The net work on it over a certain displacement is $-9.0\,{\rm J}$.  Find its final speed.

\item A particle moves at constant speed around a circle.  State the net work done during one quarter revolution and explain why.

\item A $10\,{\rm N}$ force and a $6\,{\rm N}$ opposing force act on a particle that moves $5.0\,{\rm m}$ along their common line.  Find the net work.

\item A $1.5\,{\rm kg}$ object is dropped through $4.0\,{\rm m}$ from rest.  Neglect air resistance.  Use the work-energy theorem to find its speed after the fall.

\item Show directly from $K=\frac12mv^2$ that if speed is multiplied by a factor $c$, kinetic energy is multiplied by $c^2$.

\item Explain why two particles can have the same kinetic energy but different momenta.

\item A particle has the same speed at two points on its path.  What can be concluded about the net work between the points?  What cannot be concluded about the net force during the motion?

\item Starting from $\mathbf F_{\rm net}=m\,d\mathbf v/dt$, reproduce the vector derivation of $W_{\rm net}=\Delta K$.
\end{enumerate}

\section{Summary}

For a constant-mass particle,
\begin{equation}
\boxed{
K=\frac12mv^2.
}
\end{equation}

Newton's second law gives
\begin{equation}
\boxed{
\mathbf F_{\rm net}\cdot\mathbf v
=
\frac{dK}{dt}.
}
\end{equation}

Integrating along the path gives the work-energy theorem:
\begin{equation}
\boxed{
W_{\rm net}
=
\int_i^f\mathbf F_{\rm net}\cdot d\mathbf r
=
\Delta K.
}
\end{equation}

Therefore positive net work increases speed, negative net work decreases speed, and zero net work leaves the speed unchanged.  Zero net work does not require zero force because a force can change the direction of the velocity without changing its magnitude.

The next article, M03-03, develops work by variable forces in more detail.

\section*{References}

\begin{thebibliography}{9}

\bibitem{Taylor2005}
J. R. Taylor,
\textit{Classical Mechanics},
University Science Books, 2005.

\bibitem{Kleppner2014}
D. Kleppner and R. Kolenkow,
\textit{An Introduction to Mechanics}, 2nd ed.,
Cambridge University Press, 2014.

\bibitem{Young2020}
H. D. Young and R. A. Freedman,
\textit{University Physics with Modern Physics}, 15th ed.,
Pearson, 2020.

\bibitem{OpenStax2016}
OpenStax,
\textit{University Physics, Volume 1},
Rice University, 2016.

\end{thebibliography}</content>
</record>
